Dragonhawk Tattoo Pen Not Working – 8 Proven Fix

If your Dragonhawk machine stops working, you’re not alone. This is the most common issue with the Dragonhawk pen. So, instead of becoming frustrated, you can quickly fix the problems with a few working solutions. But first, you need to understand, what are the reasons behind the Dragonhawk Tattoo Pen Not Working. 

There could be several reasons for the Dragonhawk Tattoo Pen’s malfunction. One common issue is power supply problems, such as faulty or broken power sources. Another possible cause is connection problems. For example, components like the needle cartridge, motor, and power cables are not securely attached.

The pen might also stop functioning due to issues with capacitors and connection points. Furthermore, a damaged or malfunctioning motor could prevent the tattoo pen from working. Also, problems with the needle cartridge could prevent the pen from working properly. These are the most likely reasons why the Dragonhawk tattoo pen is not functioning. 

Quick Solutions of Dragonhawk Tattoo Pen Not Working 

Problems	Solution
Connection Problems	Attach all components securely
Motor Malfunction	Replace the motor
Needle Cartridge Problems	Clean or replace it with a new one
Voltage or Settings	Make compatible voltage on both pen and power supply
Bad capacitors	Replace it with a new one
Foot pedal issue	Either fix or replace
Contact points	Make the contact proper with the front spring

Complete Solution if Dragonhawk Tattoo Pen Is Not Working 

Power Supply Issues

This is the most common issue that stops the tattoo machine from working. Power supply issues occur when there is a faulty or broken power source. Alternatively, cords not being inserted correctly could also cause the problem.

Solution:

To address this issue, ensure the tattoo power supply is connected correctly and consistently provides enough current. If the power supply units are defective or damaged, replace them with new ones. Alternatively, securely reinsert the power cord if the problem arises from a loose power cord.

Connection Problems

This is another possible reason the Dragonhawk tattoo pen does not work. For example, if essential components such as tattoo cartridge needles, the motor, and power cables are not correctly connected, the tattoo pen can stop functioning.

Solution:

Ensure that all of these components are correctly connected and functioning. If they are not, reconnect them securely. If you identify any defective parts, replace them with new ones. After completing these steps, recheck to see if the issue has been fixed.

Motor Malfunction

If your Dragonhawk brand machine has stopped working, it might be due to a faulty motor. This issue is quite common, especially with rotary tattoo machines.

Solution 

If you’re experiencing a problem with the motor, it’s recommended to seek professional repair services to address the motor issue. Alternatively, consider replacing the motor that is a quick solution.

Needle Cartridge Problems

If tattoo needles are not correctly installed, it can lead to a Dragonhawk Tattoo Pen malfunction. Improper installation can result in various issues, such as:

• Lack of Needle Movement
• Inconsistent Performance
• Motor Strain
• Incorrect Needle Depth
• Machine Damage

These problems arise due to the incorrect placement of the tattoo needles.

Solution:

If the tattoo pen stops working because of this problem, reinsert the needle securely and accurately. If you need help with how to do this, please refer to the instructions provided by the manufacturer. Additionally, ensure that these needles are compatible with your rotary tattoo machine.

Voltage Settings

 Almost all tattoo machines, including coil and rotary, allow setting the device at different speed levels by adjusting its voltage. However, incorrect voltage settings often prevent the pen from working, as all electronic devices require specific voltage to work properly. When a device is configured with either too low or high voltage, it can result in the pen not functioning. For example, there are several potential reasons why an incorrect voltage setting can affect a tattoo pen:

• Inconsistent Motor Performance
• Overheating
• Needle Jamming
• Premature Wear and Tear
• Electrical Damage

Solution:

Review the voltage settings and adjust them according to the manufacturer’s recommended low or high voltage. Next time, avoid setting the voltage too high or too low.

Bad Capacitors

The capacitor is an essential component of a coil tattoo machine that controls the current flow. This component also reduces spark and wear on connection points to provide a smooth voltage. Yet, when capacitors malfunction, they can lead to the following issues with the Dragonhawk Tattoo Pen:

• Power Supply Problems
• Motor Start-Up Challenges
• Inconsistent Operation
• Electrical Damage

Solution:

To fix this issue, first, troubleshoot the problem by checking all components of the coil setup. If you identify an issue with the capacitor, replace it with a new one to fix it.

Foot Pedal Issue

The foot pedal is another important part of the tattoo machine. It helps to control the movement of the needle during tattooing operations. However, uncareful use of the foot pedal can create problems. 

Solution:

First, you need to figure out the problem with the foot pedal to fix this issue. It could be broken or have a plug issue, such as a loose wire. If the wire is indeed open, securely plug it in again. Additionally, ensure that the positive and negative cables are not connected or touching each other. If they’re done, this could lead to a short circuit. When a short circuit occurs, it can disrupt the flow of current.

If both wires are connected, proceed to disconnect them carefully. Afterward, test the cord again by plugging it into the housing and activating the device. Check if the foot pedals are now functioning as expected. However, if the foot pedal is broken or faulty, the only solution is to replace it. Furthermore, if you want to eliminate foot pedal issues, switch to wireless tattoo machines. 

Contact Screw

 In most cases, Dragonhawk Tattoo pens stop working when the contact screw fails to contact the front spring. The front spring helps to flow the current, so if it malfunctions, it disrupts the electricity flow.

Solution:

If the contact screw does not contact the front spring, readjust it. The contact screw is often adjusted too high, which can cause this problem. Adjust it downward until it makes contact with the front spring. 

Conclusion:

If the Dragonhawk Tattoo Pen is not working, it doesn’t have to be the end of the story. You can fix the issue using the simple solutions I’ve listed above. Firstly, identify the problem and then proceed with the suggested methods.

FAQs